18W IP65 Waterproof RGB LED track spot light from light manufacturer SL-BL021W-RGB180
LED track spot light Features
LED track spot light Product advantages
1 High Lumen Imported LED light source, high lumen low decay. Fast heat conduction, 1.6mm thick aluminum plate, with good thermal conduction.
2 Long life span good heat dissipation, LED PN junction temperature is below 65 degrees during normal operation, up to 50,000 hours life span.
3 Colorful LED RGB module adopts 3-in-1 RGB epistar wick and 6 leds/bar, achieves a variety of color changing.
4 Easy installation LED RGB module adopt plug-in terminal connector, with two holes for fixing, can lock the screws and diamond nut by hand, easy to install.
5 Using switching constant current technology, with high light transfer rate, up to 85%.
LED track spot light Installation introduction
LED track spot light Matters need attention
1 The LED module and it’s component can’t be extruded.
2 The circuit on the PCB board can’t be damaged when you installing the module The LED module must install on the aluminum for heat sink, or it will has a big impact on the life span of the LED module.
3 Please turn off the power supply when you installing the LED module, everything should do according the safety standard of the component.
4 You don’t need connect the DIM wire if your LED module don’t need dimmable.
5 The LED module should install in the same direction.
6 The input voltage of the LED module is DC24V, so you can’t connect the LED module with the voltage AC220V.
7 The RGB controller should be output three circuit, meanwhile you should think about the power that RGB controller can controller.